DS1074B | 70 MHz Digital Oscilloscope
Selection Guide
The DS1000B Series Oscilloscopes offer 4 Channel measurement capability with adjustable trigger sensitivity for effective noise removal and false trigger elimination. The DS1000B series offers built-in USB host support , USB flash drive support and PictBridge printer support. LXI class C LAN ethernet connectivity is standard. DS1000B oscilloscopes provide users with backlit keys, ituitive user interface and builtin menu help in both English and Chinese.
- 4 Analog channels plus external trigger
- 2 GSa/sec max sample rate
- 5.7” TFT QVGA (320×240) with 64K color LED backlight display with power save mode
- A dvanced trigger modes including Edge, Video, Pulse Width, Alternate and Pattern trigger
|
Model
|
||
|
Bandwidth
|
70 MHz
|
|
|
Memory Depth
|
16 kpts（half channel）, 8 kpts（each channel）
|
|
|
Channels
|
4 channels ＋ external trigger
|
|
|
Real-time Sample Rate
|
2 GSa/s（half channel）, 1 GSa/s（each channel）
|
|
|
Equivalent-time Sample Rate
|
10 GSa/s
|
|
|
Rise Time
|
5.8 ns
|
|
|
Input Impedance
|
1 MΩ||18 pF
|
|
|
Timebase Range
|
5 ns/div ~ 50 s/div
|
|
|
Trigger modes
|
Edge, Video, Pulse Width, Alternate, pattern trigger across 4 analog channels
|
|
|
Vertical Sensitivity
|
2 mV/div ~ 10 V/div
|
|
|
Vertical Resolution
|
8 bits
|
|
|
Maximum Input Voltage
|
All Inputs 1MΩ||18pF 300Vrms Max CAT I
|
|
|
Cursor Measurement
|
Manual, Track and Auto Measure modes.
|
|
|
Automatic Measurements
|
Vpp, Vamp, Vmax, Vmin, Vtop, Vbase, Vavg, Vrms, Preshoot, Overshoot, Frequency, Period, Rise Time, Fall time, Positive Width, Negative Width, Positive Duty Cycle, Negative Duty Cycle, Time Delay A→B, Time Delay A→B, Phase Delay A→B,- Phase Delay A→B
|
|
|
Math
|
＋, －, ×, FFT
|
|
|
Internal Storage
|
10 waveforms, 10 setups
|
|
|
USB Storage
|
8 bits BMP, 24 bits BMP, PNG,CSV,Waveforms and Setups against USB flash drive’s limit
|
|
|
Connectivity
|
USB Device, dual USB Host, LXI-C compliant LAN
|
|
|
Display
|
5.7” TFT QVGA(320×240) with 64K color LED backlight display
|
|
|
Power Supply
|
AC:100-127V,45Hz-440Hz;100-240V,45Hz-65Hz. 60VA Max
|
|
| DS1000B Specs |
| |
Datasheets
| DS1000B Datasheet |
|
User's Manual(s)
| DS1000B User's Guide |
|
| Probe Data Sheet |
|
| Oscilloscope Declassification Guide |
|
Programming Manual(s)
| DS1000B Programming Guide |
|
Specifications
| DS1000B Specs |
|
Service Manuals
| 3 Year Product Warranty Agreement |
|
Catalogs
| Full Line Catalog |
|
| Product Selection Guide |
|
To get started using your instruments over the bus download UltraSigma instrument communication software or for older instruments or customized installations review the How to Guide:
Using VISA and drivers to communicate with instruments
For help writing your own programs for our instruments review the programming manual or contact us directly.
Drivers
| DS1000B IVI Driver |
|
Software Applications
| Simple Excel VBA Control program DS1000CA DS1000B Oscilloscopes |
|
| UltraScope User's Video |
|
| UltraScope Installation Video |
|
| UltraScope for DS1000B |
|
| UltraScope Windows 7 installation instructions |
|
| How do I install Ultra Signal Studio, Ultra Spectrum, or Ultra Power? |
|
| UltraSigma |
|
| C#.NET basic instrument communication example |
|
| User's Guide for UltraSigma Software |
|
| How do I install UltraSigma? |
|
Standard Accessories (included)
-
Probes - qty. 4
-
Packing Kit
-
Product CD
-
Calibration Certificate
-
Power Cord
-
USB Cable
Optional Accessories
-
USB-GPIB
$299
In StockUSB-GPIB Converter. Connect USB directly to instrument and control it via GPIB. This does not connect to a PC directly.
-
-
-
RP1050H
$999
Ships in 4-6 weeksHigh Voltage 15KV (1000:1), 50MHz Passive Probe. AC:Pulse = 30KVpp AC:Sine= 10KVrms
-
-
-
-
-
RP1004C
$4,250
Ships in 7-9 weeksCurrent Probe, DC-100 MHz,50 A peak. Requires RP1000P power supply.
-
-
RP1005C
$3,750
Ships in 7-9 weeksCurrent Probe, DC-10 MHz,300A peak. Requires RP1000P power supply.
-
-
-
-
-
-
-
Price vs. Bandwidth
-
DS1000B internal webpage tips Here are some tips on using the DS1000B internal webpage. 
How To Acquire Average waveforms from DS1000 Scopes DS1000 Series B and CA have firmware to write averaged waveforms to a USB stick. Averaged waveforms can be ported to computer with ULTRASCOPE How do I find the serial number and firmware revision of my DS1000 series of oscilloscope? Press Utility > Down arrow (Page 1/2) > Down arrow (Page 2/2) > Press Sys Info. How to open .WFM ( WFM Waveform files) under UltraScope? Please see the attached PDF instruction for a more detailed steps and screen-shots: 1: Under UltraScope click the icon of Add new memory waveform. 2: Click the File button in the File, and choose the .wfm file you want to open 3: Now the waveform Can I install UltraScope for Guests and Users without Administrative Privileges on Windows 7? By Default, Ultrascope will only be installed on the administrative user accounts. To use Ultrascope on Guest and other user accounts without administrative privileges, please follow the attached directions. Note: These instructions were developed on Win 7 and may not work How to use Ultrascope with Serial (RS-232) connections This document explains how to use a Serial connection with Ultrascope to remotely control and collect data from DS1k series of scopes. What products are LXI compliant? The attached document lists the LXI Compliant instruments. DS1000B Packing List Here is a sample of the DS1000B Series Oscilloscope packing list. What are RCD files? Files that have the RCD extension are binary files used in Rigol DS1000 Series scopes to store waveform recordings. This file can be used to view recordings on a DS1000 Series scope or using UltraScope software. What is the capacitance of the RP6150 and RP6150A passive probe? 1.6pF. Square wave displayed as sine wave on an oscilloscope. A scope user attempting to view a square wave on an oscilloscope might view a sine wave of the same frequency in place of a square wave. This is not a necessarily a sign of a defect with the scope or the generator, however an effect of the constituent hig Are your products UL or CSA listed? At this time, many of our products are C TUV USA listed. Per the TUV website, http://www.tuvasi.com/en/tests-and-analysis/information-about-nrtl-tests.htmlThe C TUV US mark is recognized as the equivalent and direct replacement to the UL and CSA m When I plug in my instrument via USB, I get a Windows Page Fault error ( Blue Screen of Death / BSoD ). There is a known issue with the IVI VISA Shared components version.See attached document for more details. What data set size is used to calculate the FFT on the DS series of scopes? The FFT is calculated using the displayed data set.DS1000E/D/B/CA series scopes = 600 Data pointsDS4000 series = 700 pointsDS6000 series = 700 points Software Compatibility The attached PDF file describes Windows 7 Compatibility Issues. Help File Error: Navigation to web page cancelled. Some instrument manuals are compiled HTML files with extensions ending in .CHM. On occasion, they have shown Navigation to web page cancelled. Here are some steps to help solve that error. Where do I find instrument drivers for LabVIEW? http://www.ni.com/downloads/idnet/ Rigol Scopes VISA Driver Installation / Rigols UltraScope software not detect Rigol scope attached to PC via USB OR User receives Run Time Error '48': File not found VISA32.DLL error message when UltraScope is launched. The user either has not installed the latest available National Instruments VISA Runtime engine or the version of National Instruments VISA Runtime Engine included on the CD that the user installed is outdated.In both cases, the recommended solution VISA Runtime for Apple OS X To use a VISA compatible Rigol instrument under Apple OS X, the user must install National Instruments VISA run-time engine for OS XAs of this writing the latest OS X VISA run-time engine from National Instruments is NI-VISA 5.0NI-VISA 5.0 can be Can you set up any RIGOL scopes to stop triggering after a specific averaging number? Not at this time. The average acquisition mode for the DS1000E/D, DS1000CA, DS1000B, DS4000, and DS6000 scopes are identical in function. They collect a boxcar average of the last acquisitions on a rolling basis. How do I configure a DS1000B Series Oscilloscope to return maximum data lengths? This note covers how to configure the DS1000B series of oscilloscope to return the maximum data length.This can be useful for storing to a USB memory stick. RP2200 Users Guide RP1300H Users Guide RP3300 Users Guide RP5600 Users Guide RP6150 Users Guide RP1050H Users Guide Standard probes for all scopes Here is a listing of the standard probes that ship with each scope. Why does my data not appear to have 8 bits of resolution? The displayed data is a subset of the actual total measurement range. This is mainly due to a smaller number of vertical pixels than bits available. See attached for more details. Bits vs. dBs Here are instructions on converting bits of resolution to dBs. Benefits of deep memory Modern oscilloscopes feature many powerful tools to help you get your job done. Here are some of the benefits of deep memory. My Instrument IVI Driver does not appear in the LabVIEW tools palette. You may need to manually find and convert the IVI driver. See attachment for more details. The instrument not recognized over the USB bus In some cases, an instrument may not be recognized over the USB bus. Here are some troubleshooting hints to help. -
-
Utilizing deep memory with Rigol DS1000 Oscilloscope. Some Digital scopes offer the capability of capturing waveforms in Long Memory mode. Utilizing the long memory, Rigol scopes can capture complex signals in great detail over extended time periods. This allows an observer to examine high frequency effects Running the DSA800 from a Battery Includes performance data for DSA800 while running on battery. -
