DSA1000A   |  Series Performance Spectrum Analyzers

DSA1030A
Price: $5,250
In Stock

DSA1030A-TG3
Price: $6,300
Ships in 4-6 weeks

DSA1000A series is a performance spectrum analyzer with advanced measurement capabilities for any use case. Our use of digital IF technology guarantees the reliability and performance required to meet the most demanding RF applications. With its exceptional value for the price it is widely used in electronics manufacturing, failure analysis, and R&D.
  • 3 GHz Bandwidth
  • All digital IF Design
  • 10 Hz Minimum Resolution Bandwidth
  • Standard Preamplifier for high performance noise levels down to DANL of -148 dBm
  • Save thousands of measurements and system configurations with 1 GB of internal storage
  • Options including Tracking Generator, Advanced Measurements, PreAmplifier, and Case
Model
Frequency Range
9kHz - 3GHz
DANL*1
-148dBm
Phase Noise
-88dBc/Hz @10kHz offset typical
Total Amplitude Accuracy*2
<1.0dB
Minimum RBW
10Hz
RF Input Maximum Level
+30dBm
Interfaces
USB host & device, LXI-C (Ethernet), GPIB (optional), VGA output, 10 MHz REF In, 10 MHz REF Out, External Trigger In
Trigger Source
Free Run, Video, External
External Trigger Level
5 V TTL
Dimensions
 
Weight
6.2kg(without battery)

*1: 10Hz RBW, standard preamplifier on, typical
*2: 95% confidence level

DSA1000A Specs

DSA1000A Specs

Datasheets

DSA1000A Datasheet

User's Manual(s)

DSA1000A Quick guide

DSA1000A User's Guide

DSA Declassification Guide

Programming Manual(s)

DSA1000A Programming Guide

Specifications

DSA1000A Specs

Service Manuals

3 Year Product Warranty Agreement

Catalogs

Full Line Catalog

Product Selection Guide

To get started using your instruments over the bus download UltraSigma instrument communication software or for older instruments or customized installations review the How to Guide:
Using VISA and drivers to communicate with instruments

For help writing your own programs for our instruments review the programming manual or contact us directly.

Drivers

DSA1000 IVI Driver

DSA1000 IVI Driver

Software Applications

Request the Latest Firmware

How do I install UltraSigma Compatible software?

UltraSigma

C#.NET basic instrument communication example

UltraSpectrum

Simple Excel VBA Control program DSA8, DSA1000, DSA1000A Spectrum Analyzers

User's Guide for UltraSigma Software

Pass/Fail Limit Builder

LabVIEW 2010 Example Basic DSA Control

How do I install UltraSigma?

How do I retrieve data using UltraSigma and a DSA?

How do I install UltraSigma Compatible software?

UltraSigma

C#.NET basic instrument communication example

UltraSpectrum

Simple Excel VBA Control program DSA8, DSA1000, DSA1000A Spectrum Analyzers

User's Guide for UltraSigma Software

Pass/Fail Limit Builder

LabVIEW 2010 Example Basic DSA Control

How do I install UltraSigma?

How do I retrieve data using UltraSigma and a DSA?

Request the Latest Firmware

Standard Accessories (included)

  • Packing Kit
    Packing Kit

     

  • Product CD
    Product CD

     

  • Calibration Certificate
    Calibration Certificate

     

  • Power Cord
    Power Cord

     

  • USB Cable
    USB Cable

     

Optional Accessories

  • DSA1000-SCBA
    DSA1000-SCBA

    $150
    Ships in 4-6 weeks

    Soft Carrying Bag for a DSA1000 Series or DSA1000A Series Spectrum Analyzer.

     

  • USB-GPIB
    USB-GPIB

    $299
    In Stock

    USB-GPIB Converter. Connect USB directly to instrument and control it via GPIB. This does not connect to a PC directly.

    Related Document:  

  • VB1020
    VB1020

    $599
    Ships in 4-6 weeks

    VSWR Bridge and DSA8-VSWR Software Upgrade for Rigol Spectrum Analyzer

    Related Document:  

  • VB1040
    VB1040

    $799
    In Stock

    800 MHz to 4 GHz VSWR Bridge for DSA1030-TG and DSA1030A-TG

    Related Document:  

  • USB-GPIB
    USB-GPIB

    $299
    In Stock

    USB-GPIB Converter. Connect USB directly to instrument and control it via GPIB. This does not connect to a PC directly.

    Related Document:  

  • Tracking Generator
    Tracking Generator

    $999
    Ships in 1-3 weeks

     

  • ATTENUATOR-40
    ATTENUATOR-40

    $50
    In Stock

    40 dB attenuator accessory for oscilloscopes or generators

     

  • UltraSpectrum
    UltraSpectrum

    $260
    Ships in 0-2 weeks

    Software for the DSA800, DSA1000 and DSA1000A series spectrum analyzers to be used within the UltraSigma package.

    Related Document:  

  • TX1000
    TX1000

    $900
    In Stock

    RF Demonstration board with built in 1 GHz Oscillator, mixer, filters, and amplifier.

    Related Document:  

  • DSA Utility Kit
    DSA Utility Kit

    $719
    Ships in 4-6 weeks

    DSA Accessories Package including?cables, adaptors, and antennas.

    Related Document:  

  • Compare Instruments

    Price vs. Frequency

  • FAQs
    Request the Latest FirmwareClick here and input information and we will get back to you with information on new firmware features and options available.
     
    Working with DSA Correction factorsHere are instructions on working with DSA correction factors.
     
    DSA Ethernet connectivity troubleshootingHere are some hints and tips to successfully connecting and testing the Ethernet connection on the Rigol DSA line of instruments.
     
    Are your products UL or CSA listed?At this time, many of our products are C TUV USA listed. Per the TUV website, http://www.certipedia.com/companies/37679/certificates?locale=en The C TUV US mark is recognized as the equivalent and direct replacement to the UL and CSA marks by city, county and state/provincial
     
    DSA Packing listHere is a sample of the packing list for the DSA family of spectrum analyzer's.
     
    When I plug in my instrument via USB, I get a Windows Page Fault error ( Blue Screen of Death / BSoD ).There is a known issue with the IVI VISA Shared components version.See attached document for more details.
     
    VB1020/1030 VSWR Bridge User's Guide and Data Sheet.Here is the spec sheet for the VSWR data sheet.
     
    VB.NET basic instrument communication exampleHere is a short example on using National Instrument VISA and VB.NET to communicate with an instrument.
     
    Software CompatibilityThe attached PDF file describes Windows 7 Compatibility Issues.
     
    Help File Error: Navigation to web page cancelled.Some instrument manuals are compiled HTML files with extensions ending in .CHM. On occasion, they have shown Navigation to web page cancelled. Here are some steps to help solve that error.
     
    Where do I find instrument drivers for LabVIEW?http://www.ni.com/downloads/idnet/
     
    Rigol Scopes VISA Driver Installation / Rigol's UltraScope software not detect Rigol scope attached to PC via USB OR User receives "Run Time Error '48': File not found VISA32.DLL" error message when UltraScope is launched.The user either has not installed the latest available National Instruments VISA Runtime engine or the version of National Instrument’s VISA Runtime Engine included on the CD that the user installed is outdated. In both cases, the recommended solution is to visit National
     
    VISA Runtime for Apple OS XTo use a VISA compatible Rigol instrument under Apple OS X, the user must install National Instruments VISA run-time engine for OS XAs of this writing the latest OS X VISA run-time engine from National Instruments is NI-VISA 5.0NI-VISA 5.0 can be
     
    DSA Calibration CertificateHere is a sample of the calibration certificate for the DSA family of spectrum analyzers.
     
    DSA External Trigger RateThe DSA 1000, 1000A, and 800 series of spectrum analyzers have an external trigger rate of approximately 5Hz.
     
    Spectrum analyzer detector selection guide.Spectrum analyzers have many options when it comes to input detector configurations. This document provides a guide to selecting the proper filter for the input signal type.
     
    DSA FM/AM Demodulation tipsHere are some helpful tips for using the demodulation function on the Rigol DSA's.
     
    Using A Tracking GeneratorKen Wyatt explains a tracking generator on his EMC blog. Leave Rigol to read it on the blog site.
     
    How to find installed DSA optionsHere are instructions for checking the installed options for the Rigol DSA series of spectrum analyzers.
     
    Bits vs. dBsHere are instructions on converting bits of resolution to dBs.
     
    DSA Firmware Upgrade instructionsSee attached for instructions to upgrade your DSA.
     
    UltraSpectrum License Activation instructionsUltraSpectrum is a software package that gives remote controlled data collection and analysis for Rigol DSA spectrum analyzers. See attached for instructions on activating the software.
     
    My Instrument IVI Driver does not appear in the LabVIEW tools palette.You may need to manually find and convert the IVI driver. See attachment for more details.
     
    The instrument not recognized over the USB busIn some cases, an instrument may not be recognized over the USB bus. Here are some troubleshooting hints to help.
     
    Does the instrument clock accuracy match the external clock accuracy?
     
    Common HAM and Broadcast uses for a spectrum analyzer.A Spectrum Analyzer can be a valuable tool for any amateur radio (HAM) or broadcast Engineer. See a few of the most popular uses in this document.
     
    How can sweep time effect my Spectrum Measurements?Sweep time and detector types can drastically effect your spectrum measurements, especially with modulated signals. See the attached note for more details.
     
    What is the fastest sweep time in Zero Span mode with a Spectrum Analyzer?That is instrument dependent, but we show how to perform a quick test using a function generator in Burst mode.
     
    Useful Getting Started EMC links
     
    Working with DSA Correction factorsHere are instructions on working with DSA correction factors.
     
    DSA Ethernet connectivity troubleshootingHere are some hints and tips to successfully connecting and testing the Ethernet connection on the Rigol DSA line of instruments.
     
    Are your products UL or CSA listed?At this time, many of our products are C TUV USA listed. Per the TUV website, http://www.certipedia.com/companies/37679/certificates?locale=en The C TUV US mark is recognized as the equivalent and direct replacement to the UL and CSA marks by city, county and state/provincial
     
    DSA Packing listHere is a sample of the packing list for the DSA family of spectrum analyzer's.
     
    When I plug in my instrument via USB, I get a Windows Page Fault error ( Blue Screen of Death / BSoD ).There is a known issue with the IVI VISA Shared components version.See attached document for more details.
     
    VB1020/1030 VSWR Bridge User's Guide and Data Sheet.Here is the spec sheet for the VSWR data sheet.
     
    VB.NET basic instrument communication exampleHere is a short example on using National Instrument VISA and VB.NET to communicate with an instrument.
     
    Software CompatibilityThe attached PDF file describes Windows 7 Compatibility Issues.
     
    Help File Error: Navigation to web page cancelled.Some instrument manuals are compiled HTML files with extensions ending in .CHM. On occasion, they have shown Navigation to web page cancelled. Here are some steps to help solve that error.
     
    Where do I find instrument drivers for LabVIEW?http://www.ni.com/downloads/idnet/
     
    Rigol Scopes VISA Driver Installation / Rigol's UltraScope software not detect Rigol scope attached to PC via USB OR User receives "Run Time Error '48': File not found VISA32.DLL" error message when UltraScope is launched.The user either has not installed the latest available National Instruments VISA Runtime engine or the version of National Instrument’s VISA Runtime Engine included on the CD that the user installed is outdated. In both cases, the recommended solution is to visit National
     
    VISA Runtime for Apple OS XTo use a VISA compatible Rigol instrument under Apple OS X, the user must install National Instruments VISA run-time engine for OS XAs of this writing the latest OS X VISA run-time engine from National Instruments is NI-VISA 5.0NI-VISA 5.0 can be
     
    DSA Calibration CertificateHere is a sample of the calibration certificate for the DSA family of spectrum analyzers.
     
    DSA External Trigger RateThe DSA 1000, 1000A, and 800 series of spectrum analyzers have an external trigger rate of approximately 5Hz.
     
    Spectrum analyzer detector selection guide.Spectrum analyzers have many options when it comes to input detector configurations. This document provides a guide to selecting the proper filter for the input signal type.
     
    DSA FM/AM Demodulation tipsHere are some helpful tips for using the demodulation function on the Rigol DSA's.
     
    Using A Tracking GeneratorKen Wyatt explains a tracking generator on his EMC blog. Leave Rigol to read it on the blog site.
     
    How to find installed DSA optionsHere are instructions for checking the installed options for the Rigol DSA series of spectrum analyzers.
     
    Bits vs. dBsHere are instructions on converting bits of resolution to dBs.
     
    DSA Firmware Upgrade instructionsSee attached for instructions to upgrade your DSA.
     
    UltraSpectrum License Activation instructionsUltraSpectrum is a software package that gives remote controlled data collection and analysis for Rigol DSA spectrum analyzers. See attached for instructions on activating the software.
     
    My Instrument IVI Driver does not appear in the LabVIEW tools palette.You may need to manually find and convert the IVI driver. See attachment for more details.
     
    The instrument not recognized over the USB busIn some cases, an instrument may not be recognized over the USB bus. Here are some troubleshooting hints to help.
     
    Does the instrument clock accuracy match the external clock accuracy?
     
    Common HAM and Broadcast uses for a spectrum analyzer.A Spectrum Analyzer can be a valuable tool for any amateur radio (HAM) or broadcast Engineer. See a few of the most popular uses in this document.
     
    How can sweep time effect my Spectrum Measurements?Sweep time and detector types can drastically effect your spectrum measurements, especially with modulated signals. See the attached note for more details.
     
    What is the fastest sweep time in Zero Span mode with a Spectrum Analyzer?That is instrument dependent, but we show how to perform a quick test using a function generator in Burst mode.
     
    Useful Getting Started EMC links
     
    Request the Latest FirmwareClick here and input information and we will get back to you with information on new firmware features and options available.
     
  • Application Notes
    EMC Precompliance Testing
    This application note covers hints and tips for implementation of precompliance steps to help lower the cost of full compliance EMC testing.It also features a series of documents that have practical use details for EMC testing.

     
    How do I measure VSWR using a Spectrum Analyzer?
    Here are instructions on using a Spectrum Analyzer to measure VSWR for an antenna. It can be applied to other passive RF devices and cables as well.

     
    FM signal transmission and demodulation demo
    This application uses a DG4162 arbitrary waveform generator and audio source to create a custom FM transmission and then a DSA-1030A spectrum analyzer to receive and demodulate the signal.

     
    DSA1000 Application Note

     
    Hardware for a simple Mixer
    This note describes using a Simple Transconductance Amplifier as a Mixer.

     
    Mixing RF Signals
    This note uses the TX1000 RF Demo Kit, A DG4000 function Generator, and the DSA815 Spectrum Analyzer to describe and demonstrate the fundamental operation of a multiplexer.

     
    EMC Precompliance: Conducted Emission Testing
    This application note covers standard practices for performing EMC conducted emissions tests using a Rigol DSA-815 spectrum analyzer.

     
    Running the DSA800 from a Battery
    Includes performance data for DSA800 while running on battery.

     
    Using probes with a Spectrum Analyzer
    This application note introduces the concept of using a passive high frequency oscilloscope probe with a spectrum analyzer.

     
    Measuring Cable Loss with a Spectrum Analyzer
    This Application Note covers how to measure cable loss using a spectrum analyzer outfitted with a tracking generator.

     
    EMC Precompliance Testing
    This application note covers hints and tips for implementation of precompliance steps to help lower the cost of full compliance EMC testing.It also features a series of documents that have practical use details for EMC testing.

     
    How do I measure VSWR using a Spectrum Analyzer?
    Here are instructions on using a Spectrum Analyzer to measure VSWR for an antenna. It can be applied to other passive RF devices and cables as well.

     
    FM signal transmission and demodulation demo
    This application uses a DG4162 arbitrary waveform generator and audio source to create a custom FM transmission and then a DSA-1030A spectrum analyzer to receive and demodulate the signal.

     
    DSA1000 Application Note

     
    Hardware for a simple Mixer
    This note describes using a Simple Transconductance Amplifier as a Mixer.

     
    Mixing RF Signals
    This note uses the TX1000 RF Demo Kit, A DG4000 function Generator, and the DSA815 Spectrum Analyzer to describe and demonstrate the fundamental operation of a multiplexer.

     
    EMC Precompliance: Conducted Emission Testing
    This application note covers standard practices for performing EMC conducted emissions tests using a Rigol DSA-815 spectrum analyzer.

     
    Running the DSA800 from a Battery
    Includes performance data for DSA800 while running on battery.

     
    Using probes with a Spectrum Analyzer
    This application note introduces the concept of using a passive high frequency oscilloscope probe with a spectrum analyzer.

     
    Measuring Cable Loss with a Spectrum Analyzer
    This Application Note covers how to measure cable loss using a spectrum analyzer outfitted with a tracking generator.

     
  • What our customers are saying
    Great Customer Support
    Rigol USA sells test instruments that are well designed and built products with an excellent price/performance ratio. Their customer support is the best I've ever experienced: very pro-active people. So when I buy a Rigol instrument, I feel like I'm buying much more than a great piece of hardware. -JH, So. CA
     
    Great Customer Support
    Rigol USA sells test instruments that are well designed and built products with an excellent price/performance ratio. Their customer support is the best I've ever experienced: very pro-active people. So when I buy a Rigol instrument, I feel like I'm buying much more than a great piece of hardware. -JH, So. CA
     
  • Facebook Recommendations
find your product by...
by application by capability by product family
 

Products

Digital Oscilloscopes

DS6000

Series Digital Oscilloscopes

DS6000 Series Digital Oscilloscopes

MSO4000

Series Mixed Signal Oscilloscope

MSO4000 Series Mixed Signal Oscilloscope

DS4000

Series Digital Oscilloscopes

DS4000 Series Digital Oscilloscopes

DS1000Z

Series Digital Oscilloscopes

DS1000Z Series Digital Oscilloscopes

DS1000D

Series Mixed Signal Oscilloscopes

DS1000D Series Mixed Signal Oscilloscopes

DS1000B

Series Digital Oscilloscopes

DS1000B Series Digital Oscilloscopes

DS1000CA

Series Digital Oscilloscopes

DS1000CA Series Digital Oscilloscopes

DS1000E

Series Digital Oscilloscopes

DS1000E Series Digital Oscilloscopes

Waveform Generators

DG1000

Series Arbitrary Waveform Function Generators

DG1000 Series Arbitrary Waveform Function Generators

DG1000Z

Series Arbitrary Waveform Function Generators

DG1000Z Series Arbitrary Waveform Function Generators

DG2000

Series Arbitrary Waveform Function Generators

DG2000 Series Arbitrary Waveform Function Generators

DG4000

Series Arbitrary Waveform Generators

DG4000 Series Arbitrary Waveform Generators

DG5000

Series Arbitrary Waveform Generators

DG5000 Series Arbitrary Waveform Generators

Digital Multimeters

DM3000

Series Digital Multimeters

DM3000 Series Digital Multimeters

DC Power Supplies

DP800

Series Power Supplies

DP800 Series Power Supplies

DP1000A

Series Power Supplies

DP1000A Series Power Supplies

Spectrum Analyzers

DSA800

Series Spectrum Analyzers

DSA800 Series Spectrum Analyzers

DSA1000A

Series Performance Spectrum Analyzers

DSA1000A Series Performance Spectrum Analyzers

RF Signal Generators

DSG3000

Series RF Signal Generator

DSG3000 Series RF Signal Generator

Data Acquisition

M300 System

Data Acquisition Mainframes

M300 System Data Acquisition Mainframes

Accessories

RM-DS-1B Rack Mount Kit

Rack Mounting Kit for a DS1000B scopes. May be different than image. Rack kits may look different than picture.

RM-2-DG1000Z

Rack Mounting Kit for TWO DG1000Z Series Generators. May be different than image. DG1Z rack kits contain mounting ears rather than a shelf or enclosure.

MC3065

DMM Module for M300 DAQ System

RM-2-M300

Rack Mount for 2 M300 Systems

UltraAcquire Pro

M300 Configuration Software with advanced data analysis features

RM-1-M300

Rack Mount for 1 M300

M3TB32

Terminal block accessory for M300 DAQ system modules with model numbers ending in 32.

MC3416

16 channel actuator module for use with M300 DAQ System Mainframe. The M3TB16 is the mating terminal block for this module.

MC3648

Matrix module for use with M300 DAQ System Mainframe. It is a 4x8 2-wire matrix switch. The M3TB48 is the mating terminal block for this module.

MC3324

24 channel multiplexer module for use with M300 DAQ System Mainframe and MC3065 DMM module. This card has 20 voltage channels configurable for 2 or 4 wire measurements and 4 current only measurement channels. The M3TB24 is the mating terminal block for this module.

M3TB34

Terminal block accessory for M300 DAQ system modules with model numbers ending in 34.

MC3724

RF module for use with M300 DAQ System Mainframe. It is a dual 4 channel RF multiplexer.

M3TB64

Terminal block accessory for M300 DAQ system modules with model numbers ending in 64.

MC3534

Multifunction module for use with M300 DAQ System Mainframe. It includes 4 DACs, 4 Totalizers, and 32 DIO bits. The M3TB34 is the mating terminal block for this module.

M3TB48

Terminal block accessory for M300 DAQ system modules with model numbers ending in 48.

MC3264

High speed reed relay 64 channel multiplexer module for use with M300 DAQ System Mainframe and MC3065 DMM module. The M3TB64 is the mating terminal block for this module.

MC3164

64 channel multiplexer module for use with M300 DAQ System Mainframe and MC3065 DMM module. The M3TB64 is the mating terminal block for this module.

MC3132

32 channel differential Multiplexer module for use with M300 DAQ System Mainframe and MC3065 DMM module. Configurable for 2 or 4 wire measurements. The M3TB32 is the mating terminal block for this module.

M3TB24

Terminal block accessory for M300 DAQ system modules with model numbers ending in 24.

M3TB16

Terminal block accessory for M300 DAQ system modules with model numbers ending in 16.

MC3232

High speed reed relay 32 channel differential Multiplexer module for use with M300 DAQ System Mainframe and MC3065 DMM module. Configurable for 2 or 4 wire measurements. The M3TB32 is the mating terminal block for this module.

CAN-DS2000A

CAN Bus Analysis Kit (Trigger + Decoding) for the DS2000A series oscilloscopes.

RP1010H

High Voltage Probe with 40MHz bandwidth, 10kV max DC voltage, 1000:1

RP1018H

High Voltage Probe with 150MHz bandwidth, 18kV max DC voltage, 1000:1

MEM-DG1000Z

16M Arb memory Depth Option for the DG1000Z series generators

RP3500A

500 MHz Passive Probe

RM-DS2

Rack Mount Kit for the DS2000 Series Oscilloscope

IQ-DSG3000

I/Q Modulation option for DSG3000 Signal Generators

PMC-DSG3000

Power Meter Control option for DSG3000 Signal Generators

PUG-DSG3000

Pulse Train Generator option for DSG3000 Signal Generators

OCXO-A08

High Stable OCXO Reference Clock option for DSG3000 Signal Generators

RM-DSG3000

Rack Mount kit for DSG3000 Signal Generators. May be different than image. Rack kits are different for each instrument.

RM-2-DP800

Rack Mounting Kit for a DP800 Series Power Supply. May be different than image. Rack kits are different for each instrument.

RM-DS1000Z

Rack Mounting Kit for a DS1000Z Series Oscilloscope. May be different than image. Rack kits are different for each instrument.

REC-DS1000Z

Waveform record and play option for DS1000Z

SA-DS1000Z

Serial decoding and trigger option for DS1000Z

AT-DS1000Z

Advanced trigger option for DS1000Z

MEM-DS1000Z

24Mpts memory depth option for DS1000Z Oscilloscopes

RP3300A

300 MHZ PASSIVE PROBE 10:1 fixed attenuation

CARRY BAG-G1

Instrument Carry Case for a DSA800 Spectrum Analyzer, DG4000 generator, or DS2000 scope.

CARRY BAG-B1

Instrument Carry Case for a DS1000 Series Oscilloscope

DP8-AFK

Detect and Analyzer option for DP832

DP8-INTERFACE

RS-232 and LAN interface option for DP832

DSA1000-RMSA

Rack Mounting Kit for a DSA1000 Series or DSA1000A Series Spectrum Analyzer. May be different than image. Rack kits are different for each instrument.

RM-DP-1

Rack Mounting Kit for a DP800 or DP1000 Series Power Supply. May be different than image. Rack kits are different for each instrument.

RP1003C

Current Probe, DC-50 MHz,50A peak

RP1000P

RP1003C/RP1004C/RP1005C probe power supply

RP1002C

Current Probe, DC-1 MHz,100A peak

RP1025D

High Voltage Differential Probe, DC-25 MHz, 1400 Vpp

RP1100D

High Voltage Differential Probe, DC-100 MHz, 7000 Vpp

RP1001C

Current Probe, DC-300 kHz,100 Apeak

RP1005C

Current Probe, DC-10 MHz,300A peak. Requires RP1000P power supply.

RP1050D

High Voltage Differential Probe, DC-50 MHz, 7000 Vpp

RP1004C

Current Probe, DC-100 MHz,50 A peak. Requires RP1000P power supply.

DP8-HI-RES

1mV/1mA Resolution Option for DP832

DP8-DIGITAL-IO

Four channels for trigger in & out option for the DP832

DSA1000-FPCS

Replacement Front Panel Cover for a DSA1000 Series or DSA1000A Series Spectrum Analyzer

VB1040

800 MHz to 4 GHz VSWR Bridge for DSA1030-TG and DSA1030A-TG

SD-CAN-DS4

CAN BUS Serial Decode Option for the DS4000 Oscilloscope.

DS4000-RMSA

Rack Mounting Kit for a DS4000 Series Oscilloscopes. May be different than image. Rack kits are different for each instrument.

SD-FLEXRAY-DS6

FLEXRAY BUS Serial Decode Option for the DS6000 Oscilloscope.

DG4-RMK

Rack Mounting Kit for a DG4000 Series Generator. May be different than image. Rack kits are different for each instrument.

DG-POD-A

16 Channel Digital Signal Generator Module for DG5000 Series Arbitrary Function Generators

SD-SPI-DS4

SPI BUS Serial Decode Option for the DS4000 Oscilloscope. Requires a 4 channel scope.

DM-DG1/2-RMK

Rack Mounting Kit for a DG1000 or DG2000 Series Generator or DMM. May be different than image. Rack kits are different for each instrument.

SD-I2C&SPI-DS6

I2C & SPI BUS Serial Decode Option for the DS6000 Oscilloscope. SPI Decode requires 4 channel oscilloscope.

DS6000-FPCS

Replacement Front Panel Cover for a DS6000 Oscilloscopes

DS6000-RMSA

Rack Mounting Kit for DS6000 Series Oscilloscopes. May be different than image. Rack kits are different for each instrument.

UltraStation Advanced

Arbitrary Waveform Generator Software for the DG4000 and DG5000 instruments.

SD-CAN-DS6

CAN BUS Serial Decode Option for the DS6000 Oscilloscope.

SD-FLEXRAY-DS4

FLEXRAY BUS Serial Decode Option for the DS4000 Oscilloscope.

DG5-FH

Frequency hopping software license option for DG5000 series AWG

MEM-DS2

Memory upgrade from 14 Mpts in a capture to 56 Mpts in a capture for the DS2000 scopes

AT-DS2

Advanced Triggering modes option for DS2000 series scopes. See datasheet or manual for details.

DSA800-VSWR

VSWR Measurement Kit (DSA815 Only)

RM-DS-1

Rack Mount Kit for DS1000CA/DS1000E/DS1000D Series. May be different than image. Rack kits are different for each instrument.

DSA800-EMI

EMI Filter & Quasi-Peak Detector Kit (DSA815 Only)

DSA800-AMK

Advanced Measurement Kit (DSA815Only)

SD-COMBO-DS6

Serial Bus decoding bundle for the DS6000

SD-COMBO-DS4

Bundle price for the main DS4000 serial decoding options including I2C, SPI, CAN, & RS-232.

SD-DS2

Serial data decode option for DS2000 series oscilloscopes. Includes RS-232, I2C, and SPI decoding.

RP3500

500 MHz Passive Probe

RP5600A

600 MHz Bandwidth 10:1 Passive Probe Kit (these ship standard with DS6000 Series Oscilloscopes)

ARM

Arm mount option for a DSA1000 Series or DSA1000A Series Spectrum Analyzer or DS6000 Series Oscilloscope

BNCCABLE

BNC Cable (length 1 meter)

DSA1000-SCBA

Soft Carrying Bag for a DSA1000 Series or DSA1000A Series Spectrum Analyzer.

BAT

11.1 V, 147 Wh Li-ion battery pack for a DSA1000 or DSA1000A Series Spectrum Analyzer or a DS6000 Series Oscilloscope

RP6150

1.5GHz Passive Probe. Probe may be different than image indicates.

UltraView

Datalogging Software for DM3058 (15 day free trial)

SD-RS232-DS6

RS232 & UART BUS Serial Decode Option for the DS6000 Oscilloscope.

LEAD-DMM

TEST LEAD SET FOR DMM

DSA1000-AMK

Advanced Measurement Kit

SD-RS232-DS4

RS232 BUS Serial Decode Option for the DS4000 Oscilloscope.

DG5-RMK

Rack Mounting Kit for a DG5000 Series Generator. May be different than image. Rack kits are different for each instrument.

VB1020

VSWR Bridge for Rigol Spectrum Analyzer

RP2200

150 MHZ PASSIVE PROBE

DSA Utility Kit

DSA Accessories Package including:cables, adaptors, and antennas.

PA1011

10W POWER AMPLIFIER FOR GENERATORS

ADAPTOR-50-OHM

50 Ohm impedance adapter for oscilloscopes or generators

DP-RMK

Rack Mounting Kit for a DP1000 Series Power Supply. May be different than image. Rack kits are different for each instrument.

RP7150

1.5 GHz Bandwidth Active Probe Kit option for DS6000 Series Oscilloscopes

RP1050H

High Voltage 15KV (1000:1), 50MHz Passive Probe. AC:Pulse = 30KVpp AC:Sine= 10KVrms

SD-I2C-DS4

I2C BUS Serial Decode Option for the DS4000 Oscilloscope.

DSA800-RMSA

Rack Mounting Kit for a DSA800 Series Spectrum Analyzer. May be different than image. Rack kits are different for each instrument.

CARRY BAG

Instrument Carry Case for a DS1000 Series Oscilloscope

TX1000

RF Demonstration board with built in 1 GHz Oscillator, mixer, filters, and amplifier.

UltraSpectrum

Software for the DSA1000 and DSA1000A series spectrum analyzers to be used within the UltraSigma package.

USB-GPIB

USB-GPIB Converter. Connect USB directly to instrument and control it via GPIB. This does not connect to a PC directly.

RP1300H

100:1 300 MHz TO 2KV PASSIVE PROBE

ATTENUATOR-40

40 dB attenuator accessory for oscilloscopes or generators