DP800
The DP800 Series Power Supplies combine the ability to source, analyze, and coordinate over time on a powerful platform. The DP800 Series is a family of linear power supplies systems with 1, 2, or 3 outputs and 140 to 200 Watts in total. With one channel isolated users can reconfigure instruments into any number of systems or applications. Built in V, A, and W measurements make power monitoring easy, but additional wave tracking, timing, and analysis features in the advanced "A" models means there are even more ways to use the instruments. Digital triggering between instruments also makes it possible to reliably combine and connect supplies together. Intuitive to use for everything from education labs to the R & D bench, the DP800 family of power supplies provide incredible value for any application. Select the value models for best price performance or upgrade to the "A" model to improve resolution and add advanced monitoring, triggering, and programming capabilities.
Functions and features
Low ripple noise: <350uVrms / 2mVpp
The ultra-low noise design meets the users' needs for high-purity power supply.
Fast transient response time: < 50us
A power supply response time of no more than 50 microseconds meets users' needs for rapidly changing voltage waveforms.
Standard timed output
When the timer is turned on, the instrument will output the preset voltage and current (up to 2048 sets). Users can set the number of output sets of the timer and set the output voltage, current, and timing time for each set. (The picture uses DP831A as an example).
Built-in V/A/W measurement and waveform display
Measure in real-time and simultaneously display the changing trends of V/A/W parameters. (The picture takes DP831A as an example).
Functions such as output analysis, monitoring, and setting presets
It has functions such as output analysis, monitoring, and preset setting to achieve comprehensive monitoring and analysis. (The picture takes DP831A as an example).
Original 3.5-inch TFT wide-screen display
The traditional numerical interface and the dashboard interface can be switched, with simple operation and intuitive clarity.
DP800
Model |
Channels |
Total Power |
Max Voltage |
Max Current |
Price |
|
|---|---|---|---|---|---|---|
| DP831 | 3 channel(s) | 160 Watts | 30 Volts | 5 Amps | $429 |
|
| DP832 | 3 channel(s) | 195 Watts | 30 Volts | 3 Amps | $429 |
|
| DP811 | 1 channel(s) | 200 Watts | 40 Volts | 10 Amps | $549 |
|
| DP821 | 2 channel(s) | 140 Watts | 60 Volts | 10 Amps | $549 |
|
| DP813 | 1 channel(s) | 200 Watts | 20 Volts | 20 Amps | $669 |
|
| DP822 | 2 channel(s) | 180 Watts | 20 Volts | 16 Amps | $669 |
|
| DP831A | 3 channel(s) | 160 Watts | 30 Volts | 5 Amps | $589 |
|
| DP832A | 3 channel(s) | 195 Watts | 30 Volts | 3 Amps | $589 |
|
| DP821A | 2 channel(s) | 140 Watts | 60 Volts | 10 Amps | $709 |
|
| DP811A | 1 channel(s) | 200 Watts | 40 Volts | 10 Amps | $709 |
|
| DP813A | 1 channel(s) | 200 Watts | 20 Volts | 20 Amps | $819 |
|
| DP822A | 2 channel(s) | 180 Watts | 20 Volts | 16 Amps | $819 |
|
DP800 Programming Guide
|
|
DP800 Datasheet
|
 UltraPower | Power Supply Control Software for the DP1000 and 800 Series Power Supplies. |
| UltraSigma Instrument Connectivity Driver | Software for Communicating with instruments over VISA. UltraSigma is also a container and gateway for software such as Ultra Signal Studio, Ultra Spectrum, Ultra Power, and more. |
| C#.NET basic instrument communication example | Here is a short example on using National Instrument VISA and C#.NET to communicate with an instrument. |
| DP1116A LabVIEW 2010 Demo Code IV Sweep | This demo code uses LabVIEW 2010 and VISA to program a Rigol DP1116A power supply to sweep either voltage or current and measure current or voltage.
This can be used to characterize many different devices such as LED's, Diodes, Transistors, and resistors. |
| How do I install UltraSigma Compatible software? | You will need to have Ultra Sigma installed first.
Contact Rigol for more information.
Ultra IQ provides modulation waveform editing for the DSG3000 series of RF sources.
Ultra Power provides instrument control and data collection for the Rigol DP series of power supplies.
Ultra Signal Studio is a legacy software package that provides arbitrary waveform creation, editing, and download capabilities for the Rigol DG4000 and DG5000 arbitrary waveform generators.
Ultra Station is a software package that provides arbitrary waveform creation, editing, and download capabilities for the Rigol DG1000Z, DG4000 and DG5000 arbitrary waveform generators.
Ultra Spectrum provides instrument control and spectrum analysis for Rigol DSA1000, 1000A, and 800 series Digital Spectrum Analyzers. |
| How do I install UltraSigma? | UltraSigma is a software installation that provides basic communications between a computer and an instrument using VISA.
It is also used to contain instrument specific software like UltraSpectrum for use with Rigol Spectrum Analyzers, Ultra Signal Studio for Arbitrary Waveform Generators, and Ultra Power for Power Supplies. |
| Rigol Software Installation and Usage guide | An overview of the installation and usage of the Ultra Family of software products from RIGOL |
| User's Guide for UltraSigma Software | UltraSigma is a VISA based communication and shell program that eases communication and remote control of instrumentation.
We have built a short user's guide to familiarize user's with the features of UltraSigma. |
Rack Mount Kit
Model |
Description |
Price |
Downloads |
Action |
|---|---|---|---|---|
RM-2-DP800
|
Rack Mounting Kit for quantity 2 DP800 Power Supplies or 2 DL3000 Loads. May be different than image. Rack kits are different for each instrument. |
$122
|
|
|
|
RM-1-DP800
|
Rack Mounting Kit for quantity 1 DP800 Power Supplies or 1 DL3000 Load. May be different than image. Rack kits are different for each instrument. |
$137
|
|
Cable
Model |
Description |
Price |
Downloads |
Action |
|---|---|---|---|---|
10A-Testing-Cable
|
10 A testing cable for DP Series |
$25
|
|
|