MSO8000
The MSO8000 Series Oscilloscopes combine best in class sampling and memory depth with our modern, flexible User Interface enabled by our new UltraVision II architecture and innovative Phoenix Chipset. With 600 MHz, 1 GHz, and 2 GHz models (and a 3 GHz optional upgrade), the four-channel MSO8000 Series brings RIGOL’s UltraVision II performance to the high speed engineering bench. The MSO8000 also adds Jitter and Real-time Eye Analysis capabilities in addition to other UltraVision II functions including zone triggering, 7 instruments in one, Enhanced FFTs, color grading, and histograms all supported by the high sample rate, deep memory, and full memory measurements.
Explore the MSO8000 Series Digital Oscilloscopes
Excellent bandwidth and sampling rate
The MSO8000 series digital oscilloscopes offer you a maximum analog bandwidth of 2 GHz and a sampling rate of 10 GSa/s. Low-bandwidth models can have their bandwidth upgraded to 2 GHz (single-channel and half-channel modes) at any time via software, ensuring that you have higher signal fidelity and a resolution as low as 100 ps (up to 2 ps at the smallest time base) to view tiny waveform details.
12-bit vertical resolution
12-bit resolution (212=4096) to see the most signal detail
Jitter analysis supporting diversified display
Through the jitter analysis function of the oscilloscope, multiple consecutive bits can be measured and statistically analyzed at once, efficiently completing the jitter analysis of large amounts of data.
The capture rate is as high as 600 kwfms/s
With a waveform capture rate of up to 600,000 wfms/s, the dead time can be reduced, making it easier to detect glitches and other sporadic events in the signal, thus greatly improving the debugging efficiency of engineers.
Full memory hardware measurement
No longer limited to the waveform effects visible on the screen, it can still accurately obtain results for multi-cycle high-frequency signal testing.
500Mpts deep storage, up to 450,000 frames of hardware waveform recording
The MSO8000 series comes standard with a memory depth of 500 Mpts. The hardware waveform recording function uses segmented storage technology, which can selectively capture and store the signals that users are concerned about by setting trigger conditions and mark the time on the signals. This not only ensures the efficiency of capture but also further extends the total time for waveform observation.
MSO8000
Model |
Analog Channels |
Digital Channels |
Bandwidth |
Real-time Sample Rate |
Max Memory Depth |
Waveform Capture Rate |
Price |
|
|---|---|---|---|---|---|---|---|---|
| MSO8064 | 4 | 16 (opt) | 600 MHz | 10 GSa/s | 500 Mpts | 600 Kwfms/s | $7,999 |
|
| MSO8074A | 4 | 16 (opt) | 750 MHz | 10 GSa/s | 500 Mpts | 600 Kwfms/s | $8,799 |
|
| MSO8104 | 4 | 16 (opt) | 1 GHz | 10 GSa/s | 500 Mpts | 600 Kwfms/s | $9,999 |
|
| MSO8154A | 4 | 16 (opt) | 1.50 GHz | 10 GSa/s | 500 Mpts | 600 Kwfms/s | $10,999 |
|
| MSO8204 | 4 | 16 (opt) | 2 GHz | 10 GSa/s | 500 Mpts | 600 Kwfms/s | $12,999 |
|
| MSO8204A | 4 | 16 (opt) | 2 GHz | 10 GSa/s | 500 Mpts | 600 Kwfms/s | $14,299 |
|
MSO8000 Programming Guide
|
|
MSO8000A Programming Guide
|
 Ultra Power Analyzer | Download of Ultra Power Analyzer Software |
| Ultra Station Software (New) | Waveform creation and manipulation software. Compatible with:DG1000ZDG2000DG4000DG5000 & DG5000 ProDG800 & DG800 ProDG900 & DG900 ProMSO5000 (if generator option enabled)MSO7000 (if generator option enabled)MSO8000 (if generator option enabled) |
| UltraScope Remote Interface and Control SW | Virtual Front Panel Software for the DS versions of the 1000Z, 2000, 4000, 5000, 6000, 7000, and 8000 oscilloscopes |
| UltraSigma Instrument Connectivity Driver | Software for Communicating with instruments over VISA. UltraSigma is also a container and gateway for software such as Ultra Signal Studio, Ultra Spectrum, Ultra Power, and more. |
| BIN file converter for UltraVision II Oscilloscopes | Converts BIN to CSV at the commnad prompt on a PC for BIN files created on MSO5000, DS7000, MSO7000, and MSO8000 instruments. |
| C#.NET basic instrument communication example | Here is a short example on using National Instrument VISA and C#.NET to communicate with an instrument. |
| How do I install UltraSigma Compatible software? | You will need to have Ultra Sigma installed first.
Contact Rigol for more information.
Ultra IQ provides modulation waveform editing for the DSG3000 series of RF sources.
Ultra Power provides instrument control and data collection for the Rigol DP series of power supplies.
Ultra Signal Studio is a legacy software package that provides arbitrary waveform creation, editing, and download capabilities for the Rigol DG4000 and DG5000 arbitrary waveform generators.
Ultra Station is a software package that provides arbitrary waveform creation, editing, and download capabilities for the Rigol DG1000Z, DG4000 and DG5000 arbitrary waveform generators.
Ultra Spectrum provides instrument control and spectrum analysis for Rigol DSA1000, 1000A, and 800 series Digital Spectrum Analyzers. |
| How do I install UltraSigma? | UltraSigma is a software installation that provides basic communications between a computer and an instrument using VISA.
It is also used to contain instrument specific software like UltraSpectrum for use with Rigol Spectrum Analyzers, Ultra Signal Studio for Arbitrary Waveform Generators, and Ultra Power for Power Supplies. |
| Rigol Software Installation and Usage guide | An overview of the installation and usage of the Ultra Family of software products from RIGOL |
| User's Guide for UltraSigma Software | UltraSigma is a VISA based communication and shell program that eases communication and remote control of instrumentation.
We have built a short user's guide to familiarize user's with the features of UltraSigma. |
Current Probe
Model |
Description |
Price |
Downloads |
Action |
|---|---|---|---|---|
PCA1030
|
50 MHz, 30 A Current Probe for 7000, 8000, or DHO4000 Series Oscilloscopes |
$4,890
|
|
|
PCA1150
|
10 MHz, 300 A Current Probe for 7000, 8000, or DHO4000 Series Oscilloscopes |
$5,890
|
|
|
PCA2030
|
100 MHz, 30 A Current Probe for 7000, 8000, or DHO4000 Series Oscilloscopes |
$6,390
|
|
|
RP1002C
|
Current Probe, DC-1 MHz,70A peak |
$1,791
|
|
|
RP1001C
|
Current Probe, DC-300 kHz,100 Apeak |
$867
|
|
|
RP1003C
|
Current Probe, DC-50 MHz,50A peak. Requires RP1000P power supply. |
$3,408
|
|
|
RP1004C
|
Current Probe, DC-100 MHz,50 A peak. Requires RP1000P power supply. |
$4,909
|
|
|
RP1005C
|
Current Probe, DC-10 MHz,300A peak. Requires RP1000P power supply. |
$4,332
|
|
|
RP1006C
|
Current Probe, DC-2 MHz,500A peak. Requires RP1000P power supply. ≤25mArms noise |
$5,490
|
|
Active Probe
Model |
Description |
Price |
Downloads |
Action |
|---|---|---|---|---|
RP7080S
|
Active single-ended, 800 MHz probe for 6000, 7000, and 8000 Series Oscilloscopes |
$1,049
|
|
|
|
RP7150S
|
Active single-ended,1.5GHz probe for 6000, 7000, and 8000 Series Oscilloscopes |
$2,520
|
|
|
|
RP7080
|
Active, differential, 800 MHz probe for 6000, 7000, and 8000 Series Oscilloscopes |
$2,099
|
|
|
PVA7250
|
2.5 GHz Bandwidth Active Probe Kit option |
$4,899
|
|
|
|
RP7150
|
1.5 GHz Bandwidth Active Probe Kit option for 6000, 7000, and 8000 Series Oscilloscopes |
$4,736
|
|
Digital Probe Kit
Model |
Description |
Price |
Downloads |
Action |
|---|---|---|---|---|
|
RPL2316
|
Logic probe kit for MSO8000 Series. Includes cable, leads and grabber clips - Option for all models |
$399
|
|
Demo Board
Model |
Description |
Price |
Downloads |
Action |
|---|---|---|---|---|
DK-DS6000
|
Demonstration signal board for RIGOL Oscilloscopes |
$231
|
|
|
Near Field Probe Kit
Model |
Description |
Price |
Downloads |
Action |
|---|---|---|---|---|
NFP-3
|
Near Field Probe Kit |
$499
|
|
Rack Mount Kit
Model |
Description |
Price |
Downloads |
Action |
|---|---|---|---|---|
RM6041
|
Rack Mounting Kit for the DS/MSO7000, MSO8000, RSA3000, and RSA5000 Series Instruments |
$299
|
|
Differential Probe
Model |
Description |
Price |
Downloads |
Action |
|---|---|---|---|---|
RP1025D
|
High Voltage Differential Probe, DC-25 MHz, 1400 Vpp |
$473
|
|
|
RP1050D
|
High Voltage Differential Probe, DC-50 MHz, 7000 Vpp |
$683
|
|
|
PHA0150
|
70 MHz 1500 V Differential Voltage Probe |
$799
|
|
|
PHA1150
|
100 MHz 1500 V Differential Voltage Probe |
$999
|
|
|
|
PHA2150
|
200 MHz 1500 V Differential Voltage Probe
|
$1,590
|
|
|
RP1100D
|
High Voltage Differential Probe, DC-100 MHz, 7000 Vpp |
$788
|
|
High Voltage Probe
Model |
Description |
Price |
Downloads |
Action |
|---|---|---|---|---|
RP1050H
|
High Voltage 15KV (1000:1), 50MHz Passive Probe. AC:Pulse = 30KVpp AC:Sine= 10KVrms |
$999
|
|
|
|
RP1010H
|
High Voltage Probe with 40MHz bandwidth, 10kV max DC voltage, 1000:1 attenuation |
$524
|
|
|
|
RP1018H
|
High Voltage Probe with 150MHz bandwidth, 18kV max DC voltage, 1000:1 attenuation |
$1,038
|
|
|
RP1300H
|
100:1 300 MHz TO 2KV PASSIVE PROBE |
$243
|
|
Power Analysis Jig
Model |
Description |
Price |
Downloads |
Action |
|---|---|---|---|---|
RPA246
|
Power analysis phase difference correction jig |
$59
|
|
|
GPIB Adaptor
Model |
Description |
Price |
Downloads |
Action |
|---|---|---|---|---|
USB-GPIB
|
USB-GPIB Converter. Connect USB directly to instrument and control it via GPIB. This does not connect to a PC directly. |
$346
|
|
50 Ohm Adaptor
Model |
Description |
Price |
Downloads |
Action |
|---|---|---|---|---|
ADP0150BNC
|
50 Ohm impedance adapter for oscilloscopes or generators |
$19
|
|
|
BNC Cable
Model |
Description |
Price |
Downloads |
Action |
|---|---|---|---|---|
CB-BNC-BNC-MM-100
|
BNC Cable (length 1 meter) |
$20
|
|
|
Current Probe Power
Model |
Description |
Price |
Downloads |
Action |
|---|---|---|---|---|
RP1000P
|
RP1003C/RP1004C/RP1005C probe power supply |
$1,560
|
|
|