DS2202 | 200 MHz, 2 Channel Digital Oscilloscope
Selection Guide
The DS2000 series digital oscilloscope is another Best-In-Class instrument from Rigol offering an unmatched feature/value package. The DS2000 is a fast and versatile scope covering frequencies up to 200 MHz with two channels and a wide vertical range (500uV/div-10V/div) to deliver an extremely low noise floor to help you capture smaller signals. Add a 2 GSa/s max. sample rate and 14 Mpts. of standard memory depth to its user-friendly interface and 8 inch WVGA display and you've got a scope that outperforms the competition in a wide range of bench-top and field applications.
- Wider vertical range(500uV/div ~ 10V/div), lower noise floor, better for small signal capturing
- Full bandwidth, lower overshoot(<5%),perfact frequency response design
- Bandwidth 70MHz,100MHz,200MHz
- Max. Sample Rate 2G Sa/s
- Standard Memory Depth up to14Mpts,Optional Memory Depth up to 56Mpts
- Innovative "UltraVision" technology
Model |
|
Bandwidth |
200 MHz |
Analog Channels |
2 |
Sample Rate |
2 GSa/s |
Max Memory Depth |
14Mpts(standard) ,56Mpts(option) |
Display |
8 inch LCD display |
Standard Interface |
USB Host & Device, RS-232, P/F Out |
| DS2000 Specs |
| |
| Rigol DS2000 Specs | ||
Datasheets
| DS2000 Datasheet |
|
User's Manual(s)
| DS2000 User's Guide |
|
| DS2000 Quickguide |
|
| Probe Data Sheet |
|
| Oscilloscope Declassification Guide |
|
Programming Manual(s)
| DS2000 Series Programming Manual |
|
Specifications
| DS2000 Specs |
|
| Rigol DS2000 Specs |
Service Manuals
| 3 Year Product Warranty Agreement |
|
Catalogs
| Full Line Catalog |
|
| Product Selection Guide |
|
To get started using your instruments over the bus download UltraSigma instrument communication software or for older instruments or customized installations review the How to Guide:
Using VISA and drivers to communicate with instruments
For help writing your own programs for our instruments review the programming manual or contact us directly.
Software Applications
| Simple Excel VBA Control program, DS2000, DS4000, DS6000 Oscilloscopes |
|
| How do I install Ultra Signal Studio, Ultra Spectrum, or Ultra Power? |
|
| UltraSigma |
|
| C#.NET basic instrument communication example |
|
| User's Guide for UltraSigma Software |
|
| How do I install UltraSigma? |
|
Standard Accessories (included)
-
Probes - qty. 2
-
Packing Kit
-
Product CD
-
Calibration Certificate
-
Power Cord
-
USB Cable
Optional Accessories
-
SD-DS2
$222
In StockSerial data decode option for DS2000 series oscilloscopes. Includes RS-232, I2C, and SPI decoding.
-
USB-GPIB
$299
In StockUSB-GPIB Converter. Connect USB directly to instrument and control it via GPIB. This does not connect to a PC directly.
-
MEM-DS2
$334
In StockMemory upgrade from 14 Mpts in a capture to 56 Mpts in a capture for the DS2000 scopes
-
AT-DS2
$222
In StockAdvanced Triggering modes option for DS2000 series scopes. See datasheet or manual for details.
-
-
-
RP1050H
$999
Ships in 4-6 weeksHigh Voltage 15KV (1000:1), 50MHz Passive Probe. AC:Pulse = 30KVpp AC:Sine= 10KVrms
-
-
-
-
-
RP1004C
$4,250
Ships in 7-9 weeksCurrent Probe, DC-100 MHz,50 A peak. Requires RP1000P power supply.
-
-
RP1005C
$3,750
Ships in 7-9 weeksCurrent Probe, DC-10 MHz,300A peak. Requires RP1000P power supply.
-
-
-
-
-
-
-
Price vs. Bandwidth
-
DS2000 Trial Options Description. The DS2000 Series of Oscilloscopes come from the factory pre-loaded with trial versions of each of the advanced options available for the scope.Here is a brief description of what's included and how to learn more about each option. 
What products are LXI compliant? The attached document lists the LXI Compliant instruments. Enabling Maximum Recording Length The DS2, 4, and 6000 series of oscilloscopes feature powerful record, playback, and analyze capabilities. Here are simple instructions on how to enable the maximum number of available frames for your scope. DS2000 Packing list Here is a sample of the DS2000 Series Oscilloscope packing list. DS2000 DS4000 DS6000 Firmware Upgrade Procedure Here are the instructions for upgrading the firmware on your DS2, 4, or 6000 series of scopes. Does the DS2000 Scope require external connections for self calibration? No. The DS2000 series self calibration routine specifies no connections to the inputs on the front panel. Early versions of the User's Manual are incorrect. Maximum Acquisition times for DS2000 DS4000 DS6000 scopes Here are timing charts showing maximum acquisition times for some of our deep memory scopes. Option license activation process for the DS2000, DS4000, and DS6000 Oscilloscopes Here are instructions for activating licenses for the DS2000, DS4000, and DS6000 series of oscilloscopes. What is the capacitance of the RP6150 and RP6150A passive probe? 1.6pF. Square wave displayed as sine wave on an oscilloscope. A scope user attempting to view a square wave on an oscilloscope might view a sine wave of the same frequency in place of a square wave. This is not a necessarily a sign of a defect with the scope or the generator, however an effect of the constituent hig Are your products UL or CSA listed? At this time, many of our products are C TUV USA listed. Per the TUV website, http://www.tuvasi.com/en/tests-and-analysis/information-about-nrtl-tests.htmlThe C TUV US mark is recognized as the equivalent and direct replacement to the UL and CSA m When I plug in my instrument via USB, I get a Windows Page Fault error ( Blue Screen of Death / BSoD ). There is a known issue with the IVI VISA Shared components version.See attached document for more details. What data set size is used to calculate the FFT on the DS series of scopes? The FFT is calculated using the displayed data set.DS1000E/D/B/CA series scopes = 600 Data pointsDS4000 series = 700 pointsDS6000 series = 700 points Software Compatibility The attached PDF file describes Windows 7 Compatibility Issues. Help File Error: Navigation to web page cancelled. Some instrument manuals are compiled HTML files with extensions ending in .CHM. On occasion, they have shown Navigation to web page cancelled. Here are some steps to help solve that error. Where do I find instrument drivers for LabVIEW? http://www.ni.com/downloads/idnet/ Rigol Scopes VISA Driver Installation / Rigol’s UltraScope software not detect Rigol scope attached to PC via USB OR User receives Run Time Error '48': File not found VISA32.DLL error message when UltraScope is launched. The user either has not installed the latest available National Instruments VISA Runtime engine or the version of National Instrument’s VISA Runtime Engine included on the CD that the user installed is outdated.In both cases, the recommended solution VISA Runtime for Apple OS X To use a VISA compatible Rigol instrument under Apple OS X, the user must install National Instruments VISA run-time engine for OS XAs of this writing the latest OS X VISA run-time engine from National Instruments is NI-VISA 5.0NI-VISA 5.0 can be Can you set up any RIGOL scopes to stop triggering after a specific averaging number? Not at this time. The average acquisition mode for the DS1000E/D, DS1000CA, DS1000B, DS4000, and DS6000 scopes are identical in function. They collect a boxcar average of the last acquisitions on a rolling basis. How do I configure a DS1000B Series Oscilloscope to return maximum data lengths? This note covers how to configure the DS1000B series of oscilloscope to return the maximum data length.This can be useful for storing to a USB memory stick. RP2200 Users Guide RP1300H Users Guide RP3300 Users Guide RP5600 Users Guide RP6150 Users Guide RP1050H Users Guide Standard probes for all scopes Here is a listing of the standard probes that ship with each scope. Why does my data not appear to have 8 bits of resolution? The displayed data is a subset of the actual total measurement range. This is mainly due to a smaller number of vertical pixels than bits available. See attached for more details. Bits vs. dBs Here are instructions on converting bits of resolution to dBs. Benefits of deep memory Modern oscilloscopes feature many powerful tools to help you get your job done. Here are some of the benefits of deep memory. My Instrument IVI Driver does not appear in the LabVIEW tools palette. You may need to manually find and convert the IVI driver. See attachment for more details. The instrument not recognized over the USB bus In some cases, an instrument may not be recognized over the USB bus. Here are some troubleshooting hints to help. -
-
Running the DSA800 from a Battery Includes performance data for DSA800 while running on battery. -
