MSO5000
The MSO5000 Series Oscilloscopes combine best in class sampling and memory depth with our modern, flexible User Interface enabled by our new UltraVision II architecture and innovative Phoenix Chipset. With 70 to 350 MHz models each with 2 or 4 analog channels, the MSO5000 Series brings innovative flexibility and capability to the engineer’s bench. Analyze your critical signals with zone triggering, 7 instruments in 1, Enhanced FFTs, color grading, and histograms all supported by the high sample rate, deep memory, and full memory measurements.
Explore the MSO5000 Series Digital Oscilloscopes
Bode Plot: Switching Power Supply Loop Analysis
The RIGOL MSO5000 Series Oscilloscope comes with a Bode plot function, which intuitively shows test curve and data. This can help engineers quickly determine system stability by analyzing parameters such as phase margin and gain margin.
7 in 1 Product Design
It integrates 7 independent instruments, including an oscilloscope, a 16 channel logic analyzer, a spectrum analyzer, an arbitrary wave generator, a digital voltmeter, a high-precision frequency meter and accumulator, and a protocol analyzer.
9" multi Touch Capacitive Screen
9-inch multi touch capacitive screen, supporting a variety of gesture operations, providing users with the most optimized interaction experience
Convenient Web Control Remote Control
The user only needs to input the IP address of the oscilloscope in the address bar of the web browser, then he can open the web control control software and easily handle the remote control.
Support Up to 450000 Frames of Hardware Waveform Recording
The hardware waveform recording function adopts the segmented storage technology, which can selectively capture and store the user's concerned signal by setting the trigger conditions, and mark the time on the signal, which not only ensures the efficiency of acquisition, but also further expands the total time of waveform observation.
Waveform Capture Rate Up to 500000 Times Per Second
With a waveform capture rate of up to 500000 WFMS / s, the burr and other accidental events in the signal can be found quickly, which greatly improves the debugging efficiency of engineers
Super High Sampling Bandwidth Ratio
The mso5000 series provides a real-time sampling rate of up to 8 GSa / s at 350 MHz bandwidth, with a sampling bandwidth ratio of about 23 times, which makes it a leader in the oscilloscope products of the same level, and has an ultra long waveform storage depth of 200 mpts.
Full Memory Hardware Measurement
At the same time, observe and accurately measure the signals with large frequency difference between the two channels. The full memory hardware measurement can measure the accurate frequency value in the waveform with 340k rising edgesn accurate frequency values from a waveform with 340k rising edges.
MSO5000
Model |
Bandwidth |
Analog Channels |
Digital Channels |
Real-time Sample Rate |
Max Memory Depth |
Waveform Capture Rate |
Price |
|
|---|---|---|---|---|---|---|---|---|
| MSO5072 | 70 MHz | 2 | 16 (opt) | 8 GSa/s | 100 Mpts | 500 Kwfms/s | OBSOLETE |
|
| MSO5074 | 70 MHz | 4 | 16 (opt) | 8 GSa/s | 100 Mpts | 500 Kwfms/s | $949 |
|
| MSO5102 | 100 MHz | 2 | 16 (opt) | 8 GSa/s | 100 Mpts | 500 Kwfms/s | OBSOLETE |
|
| MSO5104 | 100 MHz | 4 | 16 (opt) | 8 GSa/s | 100 Mpts | 500 Kwfms/s |
$1,099 $934 |
|
| MSO5204 | 200 MHz | 4 | 16 (opt) | 8 GSa/s | 100 Mpts | 500 Kwfms/s |
$1,499 $1,274 |
|
| MSO5354 | 350 MHz | 4 | 16 (opt) | 8 GSa/s | 100 Mpts | 500 Kwfms/s |
$1,999 $1,699 |
|
Ultra Station (New) User Guide
|
|
MSO5000&MSO&DS7000&MSO8000(A)&DS8000-R Open Source Acknowledgment
|
|
MSO5000 Quick Guide
|
|
MSO5000 User's Guide
|
|
UltraVision II Oscilloscope Declassification Guide
|
|
MSO5000 Programming Manual
|
 Ultra Power Analyzer | Download of Ultra Power Analyzer Software |
| Ultra Sigma file update for MSO5000 | Update component for UltraSigma to manage screen captures on new instruments. Requires the latest version of UltraSigma already be installed. Instructions provided. |
| Ultra Station Software (New) | Waveform creation and manipulation software. Compatible with:DG1000ZDG2000DG4000DG5000 & DG5000 ProDG800 & DG800 ProDG900 & DG900 ProMSO5000 (if generator option enabled)MSO7000 (if generator option enabled)MSO8000 (if generator option enabled) |
| UltraScope Remote Interface and Control SW | Virtual Front Panel Software for the DS versions of the 1000Z, 2000, 4000, 5000, 6000, 7000, and 8000 oscilloscopes |
| UltraSigma Instrument Connectivity Driver | Software for Communicating with instruments over VISA. UltraSigma is also a container and gateway for software such as Ultra Signal Studio, Ultra Spectrum, Ultra Power, and more. |
| BIN file converter for UltraVision II Oscilloscopes | Converts BIN to CSV at the commnad prompt on a PC for BIN files created on MSO5000, DS7000, MSO7000, and MSO8000 instruments. |
| C#.NET basic instrument communication example | Here is a short example on using National Instrument VISA and C#.NET to communicate with an instrument. |
| How do I install UltraSigma Compatible software? | You will need to have Ultra Sigma installed first.
Contact Rigol for more information.
Ultra IQ provides modulation waveform editing for the DSG3000 series of RF sources.
Ultra Power provides instrument control and data collection for the Rigol DP series of power supplies.
Ultra Signal Studio is a legacy software package that provides arbitrary waveform creation, editing, and download capabilities for the Rigol DG4000 and DG5000 arbitrary waveform generators.
Ultra Station is a software package that provides arbitrary waveform creation, editing, and download capabilities for the Rigol DG1000Z, DG4000 and DG5000 arbitrary waveform generators.
Ultra Spectrum provides instrument control and spectrum analysis for Rigol DSA1000, 1000A, and 800 series Digital Spectrum Analyzers. |
| How do I install UltraSigma? | UltraSigma is a software installation that provides basic communications between a computer and an instrument using VISA.
It is also used to contain instrument specific software like UltraSpectrum for use with Rigol Spectrum Analyzers, Ultra Signal Studio for Arbitrary Waveform Generators, and Ultra Power for Power Supplies. |
| Rigol Software Installation and Usage guide | An overview of the installation and usage of the Ultra Family of software products from RIGOL |
| User's Guide for UltraSigma Software | UltraSigma is a VISA based communication and shell program that eases communication and remote control of instrumentation.
We have built a short user's guide to familiarize user's with the features of UltraSigma. |
Current Probe
Model |
Description |
Price |
Downloads |
Action |
|---|---|---|---|---|
RP1002C
|
Current Probe, DC-1 MHz,70A peak |
$1,791
|
|
|
RP1001C
|
Current Probe, DC-300 kHz,100 Apeak |
$867
|
|
|
RP1003C
|
Current Probe, DC-50 MHz,50A peak. Requires RP1000P power supply. |
$3,408
|
|
|
RP1004C
|
Current Probe, DC-100 MHz,50 A peak. Requires RP1000P power supply. |
$4,909
|
|
|
RP1005C
|
Current Probe, DC-10 MHz,300A peak. Requires RP1000P power supply. |
$4,332
|
|
|
RP1006C
|
Current Probe, DC-2 MHz,500A peak. Requires RP1000P power supply. ≤25mArms noise |
$5,490
|
|
Digital Probe Kit
Model |
Description |
Price |
Downloads |
Action |
|---|---|---|---|---|
PLA2216
|
Logic Probe. Includes cable, leads and grabber clips |
$399
|
|
Carrying Case
Model |
Description |
Price |
Downloads |
Action |
|---|---|---|---|---|
BAG-G1
|
Instrument Carry Case for a DSA800 Spectrum Analyzer, DG4000 generator, MSO5000 or DS2000 scope. |
$155
|
|
|
Demo Board
Model |
Description |
Price |
Downloads |
Action |
|---|---|---|---|---|
DK-DS6000
|
Demonstration signal board for RIGOL Oscilloscopes |
$231
|
|
|
Instrument Cover
Model |
Description |
Price |
Downloads |
Action |
|---|---|---|---|---|
|
MSO5000-FPC
|
Front panel cover for the MSO5000 (MSO5000-FPC) |
$40
|
|
|
Rack Mount Kit
Model |
Description |
Price |
Downloads |
Action |
|---|---|---|---|---|
|
MSO5000-RM
|
Instrument Rack Mounting Kit |
$150
|
|
Differential Probe
Model |
Description |
Price |
Downloads |
Action |
|---|---|---|---|---|
RP1025D
|
High Voltage Differential Probe, DC-25 MHz, 1400 Vpp |
$473
|
|
|
RP1050D
|
High Voltage Differential Probe, DC-50 MHz, 7000 Vpp |
$683
|
|
|
PHA0150
|
70 MHz 1500 V Differential Voltage Probe |
$799
|
|
|
PHA1150
|
100 MHz 1500 V Differential Voltage Probe |
$999
|
|
|
|
PHA2150
|
200 MHz 1500 V Differential Voltage Probe
|
$1,590
|
|
|
RP1100D
|
High Voltage Differential Probe, DC-100 MHz, 7000 Vpp |
$788
|
|
High Voltage Probe
Model |
Description |
Price |
Downloads |
Action |
|---|---|---|---|---|
RP1050H
|
High Voltage 15KV (1000:1), 50MHz Passive Probe. AC:Pulse = 30KVpp AC:Sine= 10KVrms |
$999
|
|
|
|
RP1010H
|
High Voltage Probe with 40MHz bandwidth, 10kV max DC voltage, 1000:1 attenuation |
$524
|
|
|
|
RP1018H
|
High Voltage Probe with 150MHz bandwidth, 18kV max DC voltage, 1000:1 attenuation |
$1,038
|
|
|
RP1300H
|
100:1 300 MHz TO 2KV PASSIVE PROBE |
$243
|
|
Power Analysis Jig
Model |
Description |
Price |
Downloads |
Action |
|---|---|---|---|---|
RPA246
|
Power analysis phase difference correction jig |
$59
|
|
|
GPIB Adaptor
Model |
Description |
Price |
Downloads |
Action |
|---|---|---|---|---|
USB-GPIB
|
USB-GPIB Converter. Connect USB directly to instrument and control it via GPIB. This does not connect to a PC directly. |
$346
|
|
50 Ohm Adaptor
Model |
Description |
Price |
Downloads |
Action |
|---|---|---|---|---|
ADP0150BNC
|
50 Ohm impedance adapter for oscilloscopes or generators |
$19
|
|
|
BNC Cable
Model |
Description |
Price |
Downloads |
Action |
|---|---|---|---|---|
CB-BNC-BNC-MM-100
|
BNC Cable (length 1 meter) |
$20
|
|
|
Current Probe Power
Model |
Description |
Price |
Downloads |
Action |
|---|---|---|---|---|
RP1000P
|
RP1003C/RP1004C/RP1005C probe power supply |
$1,560
|
|
|